home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
mits01.txt
< prev
next >
Wrap
Text File
|
1993-04-11
|
2KB
|
50 lines
MITSUBISHI 700
NOTES: This is a single NAM unit.
The ESN prefix is 134 decimal, 86 hex.
Mitsubishi: 708-860-4200
PROGRAMING
1. Turn power on by pressing PWR for at least one second.
2. Wait for wake up cycle to end and display to clear.
3. Within ten seconds press and hold the CLR key while entering
3 1 1 1 9 1 7.
4. The SEND key is used to store and increment each step.
5. The END key is used to complete and exit programing at any time.
PROGRAMING DATA
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 10 DIGITS MUTE MIN (AREA CODE & TEL#)
02 4 DIGITS SEC SECURITY CODE
03 00000 - 32767 Sid SYSTEM ID
04 0 OR 1 LU LOCAL USE MARK
05 0 OR 1 E MIN MARK
06 333 OR 334 IPCH INITIAL PAGING CHANNEL
07 2 DIGITS ACC ACCESS OVERLOAD CLASS
08 0 OR 1 PrEF PREFERRED SYSTEM
09 2 DIGITS GI GROUP ID (10 IN USA)
10 0 OR 1 EE END TO END (DTMF) DIALING
11 0 OR 1 rI ROAM INHIBIT
12 0 OR 1 Ab A/B SYS SELECT
13 0 OR 1 AL AUTO LOCK
14 0 OR 1 bO 3 WATT BOOSTER
NOTES:
Install lock code with phone out of programing mode, press
FCN STO SSSS LLL CLR, where SSSS is the security code, and LLL is
the new lock code.
LOCK: F 2. UNLOCK: Enter three digit code.
SYSTEM SELECT: F 1 to display current, then one of the following to change:
0 = Pref/non pref, 1 = Non pref/pref, 2 = Home only, 3 = Pref only, 4 = Non
pref only.
Press CLR to store/exit.